ผู้เขียน หัวข้อ: SMF Training Room. เรียนรู้ การทำ SMF Board  (อ่าน 48144 ครั้ง)

hunser

  • คนที่ไม่รู้ว่าใคร
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #19 เมื่อ: สิงหาคม 14, 2008, 08:40:10 PM »
อ่า พอดีกำลัง ค้นคว้า cms ที่ใช้ทำ e-commerce ที่ชื่อ osCommerce อ่ะครับ
ขอบคุณมากจ้า ถ้ามีลงให้หน่อย

ออฟไลน์ nick_indy

  • http://smf.na-man.com บอร์ด IRC #คนวัยทำงาน Emergency Call Center.
  • ๛ เทพไร้คอนเซปต์ ๛
  • ไร้คอนเซปต์
  • ******
  • กระทู้: 9130
  • นิค ณ ระยอง
    • ดูรายละเอียด
    • นิค ณ ระยอง
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #18 เมื่อ: สิงหาคม 02, 2008, 12:04:44 PM »
ยินดี ครับ
# www.na-man.com : www.facebook.com/nicknarayong
# บริการ Hosting, Domain, Website, Joomla, SMF,phpBB Webboard และอื่นๆ ในราคาพิเศษสุดๆ สนใจติดต่อสอบถามได้ครับ
# Email & MSN nick@na-man.com
# หรือโทรศัพท์ 0837690256

ออฟไลน์ nick_indy

  • http://smf.na-man.com บอร์ด IRC #คนวัยทำงาน Emergency Call Center.
  • ๛ เทพไร้คอนเซปต์ ๛
  • ไร้คอนเซปต์
  • ******
  • กระทู้: 9130
  • นิค ณ ระยอง
    • ดูรายละเอียด
    • นิค ณ ระยอง
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #17 เมื่อ: มิถุนายน 30, 2008, 08:28:46 AM »
สอนตอนอัพขึ้นเวปด้วยจิคับ ทำยังไงหว่าา ขอบคุงครับ

Upload ก็แค่ FTP เข้า Hosting  ก็บแล้ว ครับคุณ anan4411

มีเสรียงเหน่อด้วย เหอๆๆๆ ตลกดีแต่ขอบคุณครับผทำได้ครึ่งนึงแว้วว  !เขิล

เสียง ภาษาระยอง
สงสัยต้องทำ Sub title
# www.na-man.com : www.facebook.com/nicknarayong
# บริการ Hosting, Domain, Website, Joomla, SMF,phpBB Webboard และอื่นๆ ในราคาพิเศษสุดๆ สนใจติดต่อสอบถามได้ครับ
# Email & MSN nick@na-man.com
# หรือโทรศัพท์ 0837690256

ออฟไลน์ นายเอ(นามสมมติ)

  • ใครใคร่อัพ อัพ -*- ใครใคร่โหลด โหลด -*- ใครอยาก .... ไปว่าวซะ อิอิ
  • แฟนคลับ
  • ขั้น 4 : แฟนคลับบอร์ด
  • ***
  • กระทู้: 800
  • ขอโทษว่ะ!!! ไม่ชอบประจบ
    • ดูรายละเอียด
    • iiAboxz บล็อกเก๋ๆของนายเอ(นามสมมติ)
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #16 เมื่อ: มิถุนายน 28, 2008, 10:42:12 AM »
มีเสรียงเหน่อด้วย เหอๆๆๆ ตลกดีแต่ขอบคุณครับผทำได้ครึ่งนึงแว้วว  !เขิล
ไม่ได้ต้องการให้เอาใจ แค่จริงใจให้เราก็พอ

anan4411

  • คนที่ไม่รู้ว่าใคร
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #15 เมื่อ: มิถุนายน 27, 2008, 07:10:06 PM »
สอนตอนอัพขึ้นเวปด้วยจิคับ ทำยังไงหว่าา ขอบคุงครับ

ออฟไลน์ nick_indy

  • http://smf.na-man.com บอร์ด IRC #คนวัยทำงาน Emergency Call Center.
  • ๛ เทพไร้คอนเซปต์ ๛
  • ไร้คอนเซปต์
  • ******
  • กระทู้: 9130
  • นิค ณ ระยอง
    • ดูรายละเอียด
    • นิค ณ ระยอง
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #14 เมื่อ: มิถุนายน 23, 2008, 05:28:15 PM »
สำหรับ MySql เวอร์ชั่น ตั้ง แต่ 4.1 ขึ้นมา เนื่องจาก ทาง MySql ได้เปลี่ยนรูปแบบ การ เก็บ ข้อมูล ที่ เป็นอักขระ ใหม่ จาก เวอร์ชั่นเดิม ทำให้ การเก็บและ แสดงผล ของ บางภาษา เช่น thai เป็น ???
เราสามารถ แสดง Character Set Support ได้ด้วย
SHOW VARIABLES LIKE 'character%';
วิธี การ แก้คือ
1.กลับไปใช้ เวอร์ชั่น 4.0 หรือน้อย กว่า แนะนำให้ใช้ 4.0.27
2.ใช้ Character Set เป็น utf-8
3.เพิ่ม คำสั่งนี้ในขั้นตอนการติดต่อ ฐานข้อมูล
$charset = "SET character_set_results=tis620";
mysql_query($charset) or die('Invalid query: ' . mysql_error());

**** COPY มาจาก เวป ...


ส่วน SMF ง่ายมาก ไป Download Thai UTF8 มาติดตั้ง ก็จบแล้ว

โค๊ด: [Select]
# MySQL Server Instance Configuration File
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
# ----------------------------------------------------------------------
#
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#
# On Windows you should keep this file in the installation directory
# of your server (e.g. C:Program FilesMySQLMySQL Server X.Y). To
# make sure the server reads the config file use the startup option
# "--defaults-file".
#
# To run run the server from the command line, execute this in a
# command line shell, e.g.
# mysqld --defaults-file="C:Program FilesMySQLMySQL Server X.Ymy.ini"
#
# To install the server as a Windows service manually, execute this in a
# command line shell, e.g.
# mysqld --install MySQLXY --defaults-file="C:Program FilesMySQLMySQL Server X.Ymy.ini"
#
# And then execute this in a command line shell to start the server, e.g.
# net start MySQLXY
#
#
# Guildlines for editing this file
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#
# More detailed information about the individual options can also be
# found in the manual.
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]

port=3306

[mysql]

default-character-set = tis620

# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
[mysqld]

# The TCP/IP Port the MySQL Server will listen on
port=3306

#Path to installation directory. All paths are usually resolved relative to this.
basedir="D:AppServ/MySQL"

#Path to the database root
datadir="D:AppServ/MySQL/data/"

# The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set = tis620
character-set-server = tis620
collation-server = tis620_thai_ci
init_connect = 'SET collation_connection = tis620_thai_ci'
init_connect = 'SET NAMES tis620'

# The default storage engine that will be used when create new tables when
#default-storage-engine=INNODB

# Set the SQL mode to strict
# sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
sql-mode="NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=16384

#
# For compatibility to other PHP MySQL function that still use old mysql connect.
#
old_passwords   = 1

# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=0

# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=256

# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=9M


# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before.  This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=8

#*** MyISAM Specific options

# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method.  This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_max_extra_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method.  This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=17M

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=10M

# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K

# This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=256K

log-slow-queries=mysql-slow.log
log-error=mysql.err

#*** INNODB Specific options ***


# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.


# Additional memory pool that is used by InnoDB to store metadata
# information.  If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS.  As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=2M

# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1

# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=1M

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system.  Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=17M

# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=10M

# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=8


my.ini ของผม
# www.na-man.com : www.facebook.com/nicknarayong
# บริการ Hosting, Domain, Website, Joomla, SMF,phpBB Webboard และอื่นๆ ในราคาพิเศษสุดๆ สนใจติดต่อสอบถามได้ครับ
# Email & MSN nick@na-man.com
# หรือโทรศัพท์ 0837690256

ออฟไลน์ ajisen16

  • แฟนคลับ
  • ขั้น 3 : ซุปเปอร์สตาร์
  • ***
  • กระทู้: 179
  • จงซื่อสัตย์กับแฟนตนเอง แล้วครื้นเครงกับแฟนคนอื่น
    • ดูรายละเอียด
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #13 เมื่อ: พฤษภาคม 24, 2008, 03:02:58 PM »
ขอบคุณครับผม
<AjIsEn>

ออฟไลน์ pvv

  • แฟนคลับ
  • ขั้น 5 : แฟนคลับระดับสูง
  • ***
  • กระทู้: 1206
  • ชีวิตเป็นของเรา
    • ดูรายละเอียด
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #12 เมื่อ: พฤษภาคม 14, 2008, 01:16:19 PM »
ขอบคุณค่ะ !แจ่ม

TheBomzaghi4

  • คนที่ไม่รู้ว่าใคร
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #11 เมื่อ: พฤษภาคม 07, 2008, 09:16:46 PM »
อยากเก่งมั่งด้วย สุดยอดเลย

ออฟไลน์ lungnid

  • แฟนคลับ
  • ขั้น 3 : ซุปเปอร์สตาร์
  • ***
  • กระทู้: 247
  • ขอบคุณสิ่งดีๆ
    • ดูรายละเอียด
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #10 เมื่อ: พฤษภาคม 05, 2008, 10:27:46 PM »
 !แจ่ม !แจ่ม

อยากเก่งมั่งจัง แต่ขอเรียนทีละขั้นก่อน
ผม + ให้ก่อนครับ วันหน้าจะต้องมาศึกษาเรื่องนี้ให้ได้เลย
 !love !love !love

dumrus

  • คนที่ไม่รู้ว่าใคร
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #9 เมื่อ: เมษายน 17, 2008, 03:41:08 PM »
thank

ekgarin

  • คนที่ไม่รู้ว่าใคร
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #8 เมื่อ: มีนาคม 27, 2008, 11:54:51 PM »
ขอบคุณมากๆครับ

ออฟไลน์ nick_indy

  • http://smf.na-man.com บอร์ด IRC #คนวัยทำงาน Emergency Call Center.
  • ๛ เทพไร้คอนเซปต์ ๛
  • ไร้คอนเซปต์
  • ******
  • กระทู้: 9130
  • นิค ณ ระยอง
    • ดูรายละเอียด
    • นิค ณ ระยอง
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #7 เมื่อ: มีนาคม 11, 2008, 08:30:40 AM »
SMF ไม่จำเป็นต้อง Re Design อะไร เลยนะ เพราะแค่โหลดธีมจากเวปของ SMF เขา
แล้วก็ Upload ขึ้นไป ก็ใช้ได้แล้ว
# www.na-man.com : www.facebook.com/nicknarayong
# บริการ Hosting, Domain, Website, Joomla, SMF,phpBB Webboard และอื่นๆ ในราคาพิเศษสุดๆ สนใจติดต่อสอบถามได้ครับ
# Email & MSN nick@na-man.com
# หรือโทรศัพท์ 0837690256

ออฟไลน์ Cloud Strike

  • แฟนคลับ
  • ขั้น 4 : แฟนคลับบอร์ด
  • ***
  • กระทู้: 928
  • ใครเล่น Maple ทายทันกันได้ ชื่อ????? ที่ Windy
    • ดูรายละเอียด
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #6 เมื่อ: มีนาคม 07, 2008, 11:06:17 PM »
น่าทำมากเลย  แต่ ผมออกแบบไม่สวย 
เลยมาทางเขียนโปรแกรมดีก่า


ไปเล่น กระบี่ ผีเสื้อ ดาวตก Online กันดีก่า  http://www.bbmth.net

comsign

  • คนที่ไม่รู้ว่าใคร
Re: SMF Training Room. เรียนรู้ การทำ SMF Board
« ตอบกลับ #5 เมื่อ: กุมภาพันธ์ 22, 2008, 10:35:49 PM »
Thanks นะครับ